- Product details
- Washing instruction
1/20NM 84 COTTON 16 METALLIC
CS4383
应用
1. 14 针横机，1 根进线
2. 克重：190克/平方米
3. 抗起球标准：7200转(相同花型.针型.张力)为3-4级
4. 染色工艺：绞纱染色
5. 起订量：样纱10kg/色
APPLICATION
1. Flat Knitting machines 14 gauge 1 ply
2. Weight per square meter:gr190(on collection fabric on jersey stitch)
3. Pilling grade:3-4:has been tested on the collection swatch(same stitch/gauge/tension)according to Pilling box(ISO 12945-1/GB/T4802.3) at 7200 turns
4. DYEING PROCESS:Yarn dye
5. MINIMUN:The minimum for yarn dye is 10kgs(sample).
织造：
1.纱线已打蜡，尽量不回倒，若必须回倒，联系技术部。
2.每只纱筒含5-6处手工结，织片遇结头或换筒时，需归边处理。
3.金银丝刚性较强，洗涤后易导致布面不平整。建议在毛衣套口前对布片进行低温小烫，再经套口、水洗工序，可有效提升布面平整度。
4.洗涤时应避免强酸或强碱环境，pH值需控制在6.5–8.0，优选中性去污助剂
5.收货后先试织，若有质量问题，15天内反馈。质量问题仅承担同等数量纱线，不负责面料织造和交货期费用。
6.织造时，损耗率6%，涵盖粗细不匀、色差、色花等导致的损耗。
KNITTING：
1:The yarn has been waxed, please do not rewind. Please contact our technical department in advance if rewinding is considered nesessary.
2:Each yarn cone has 5-6 hand knots; when encountering knots or cone changes during weaving, edge-folding treatment is required.
3:Metallic yarn is highly rigid, which tends to cause fabric surface unevenness after washing. It is recommended to lightly iron the fabric pieces at low temperature before sweater linking, followed by the linking and washing processes, which can effectively improve the fabric surface flatness.
4:Avoid strong acidic or alkaline conditions during washing. The pH value should be controlled within the range of 6.5–8.0, and neutral detergents are preferred.
5:After receiving the goods, conduct a trial knitting first. If there are any quality issues, please provide feedback within 15 days. In case of quality problems, we will only be responsible for providing the same quantity of yarn, and we will not cover the costs of fabric knitting and delivery time.
6:During weaving, the waste rate is 6%, including losses caused by uneven thickness, color deviation, color streaks, etc.
工业洗涤指示：
1.40℃以下温水洗涤，加柔软剂，浸泡10-15分钟
2.熨烫温度小于110℃
3.滚筒烘干温度60℃~80℃
4.不可氯漂
5.不同洗衣机机型可能导致效果略有差异，请根据自身需求的状态调整洗涤方法
WASHING INSTRUCTION：
1:Wash in water under 40°C with softener, soak for 10-15 mins.
2:Iron at a maximum sole-plate temperature of 110℃.
3:Tumble dry on 60℃~80℃.
4:Cannot be chlorine bleached.
5:Slight variations in results may occur with different washing machine models. Please adjust the washing method according to your specific needs and fabric conditions.
| COLOR FASTNESS(Average) | LIGHT COLOUR | SMEDIUM COLOUR | DARK COLOURS | Standard | |||
|---|---|---|---|---|---|---|---|
| Change | Stain | Change | Stain | Change | Stain | ||
| Dry cleaning | 4 | 4 | 4 | 3-4 | 3-4 | 3 | ISO 105 D01/GB/T 5711 |
| Acid perspiration | 4 | 4 | 4 | 3-4 | 3-4 | 3 | ISO 104 E04/GB/T 3922 |
| Alkaline perspiration | 4 | 4 | 4 | 3-4 | 3-4 | 3 | ISO 104 E04/GB/T 3922 |
| Washing | 4 | 4 | 4 | 3-4 | 3 | ISO 105 C06/GB/T 12490 | |
| Dry rubbing | 4 | 4 | 3 | ISO 105 X12/GB/T 3920 | |||
| Wet rubbing | 4 | 3-4 | 3 | ISO 105 X12/GB/T 3920 | |||
| Light (except white color) | 4 | 3-4 | 4 | ISO 105 B02/GB/T 8427 | |||
For above points marked by *,to refer to OEKO-TEX STANDARD 100 requirements
Above data are average values coming from tests carried out in our laboratories
