- Product details
- Washing instruction
1/25NM 40 NYLON 39 VISCOSE 21 STEEL
FS0131
应用
1. 14 针横机，1 根进线
2. 克重：260克/平方米
3. 抗起球标准：7200转(相同花型.针型.张力)为3级
4. 染色工艺：绞纱染色
5. 起订量：样纱6kg/色。
APPLICATION
1. Flat Knitting machines 14 gauge 1 ply
2. Weight per square meter:gr260(on collection fabric on jersey stitch)
3. Pilling grade:3:has been tested on the collection swatch(same stitch/gauge/tension)according to Pilling box(ISO 12945-1/GB/T4802.3) at 7200 turns
4. DYEING PROCESS:Yarn dye only
5. MINIMUN:The minimum for yarn dye is 6kgs(sample).
织造：
1.纱线已打蜡，尽量不回倒，若必须回倒，联系技术部。
2.粘胶尼龙STEEL混纺纱，纱线具有一定刚性，织片需控制速度；因含有STEEL，测试重金属不能达标。
3.该组纱线染色时易出现色差、色花，建议织片采用连续编织工艺，避免双系统织造。
4.单面布片呈现褶皱效果，是STEEL导致的正常现象。
5.收货后先试织，若有质量问题，15天内反馈。质量问题仅承担同等数量纱线，不负责面料织造和交货期费用。
6.织造时，损耗率8%，涵盖粗细不匀、色差、色花等导致的损耗。
KNITTING：
1.The yarn has been waxed. Try to avoid rewinding it.If rewinding is necessary, please contact the Technical Department.
2.Viscose-Nylon-STEEL Blended Yarn: The yarn has certain rigidity, so the knitting speed must be controlled; due to the STEEL component, it fails to meet the heavy metal test standards.
3.This group of yarn is prone to color difference and uneven dyeing during the dyeing process. It is recommended to adopt continuous knitting technology for fabric production and avoid double-system knitting.
4.The wrinkled effect on single-sided fabric is a normal phenomenon caused by the STEEL component.
5.After receiving the goods, please try knitting first. If there are any quality issues, please provide feedback within 15 days. For quality issues, we only cover the same amount of yarn and do not take responsibility for fabric weaving or delivery period costs.
6.During the knitting process,the loss rate is 8%,which includes the losses caused by uneven thickness,color difference,uneven dyeing,etc.
工业洗涤指示：
1.建议用30℃以下温水，在中性洗涤环境中浸泡10-15分钟后清洗。
2.成衣熨烫需隔布操作，避免高温直接接触金属纤维引发变色。
3.采用低温冷风模式烘干。
4:不可氯漂。
5:不同洗衣机机型可能导致效果略有差异，请根据自身需求的状态调整洗涤方法。
WASHING INSTRUCTION：
1.Wash in warm water below 30℃ under neutral conditions, after soaking for 10-15 minutes.
2.Iron the finished garment with a cloth barrier to prevent discoloration caused by direct contact between high temperature and metal fibers.
3.Tumble dry on low temperature with cool air setting.
4.Cannot be chlorine bleached.
5.Slight variations in results may occur with different washing machine models. Please adjust the washing method according to your specific needs and fabric conditions.
| COLOR FASTNESS(Average) | LIGHT COLOUR | SMEDIUM COLOUR | DARK COLOURS | Standard | |||
|---|---|---|---|---|---|---|---|
| Change | Stain | Change | Stain | Change | Stain | ||
| Dry cleaning | 4 | 4 | 4 | 3-4 | 3-4 | 3 | ISO 105 D01/GB/T 5711 |
| Acid perspiration | 4 | 4 | 4 | 3-4 | 3-4 | 3 | ISO 104 E04/GB/T 3922 |
| Alkaline perspiration | 4 | 4 | 4 | 3-4 | 3-4 | 3 | ISO 104 E04/GB/T 3922 |
| Washing | 4 | 4 | 4 | 3-4 | 3 | ISO 105 C06/GB/T 12490 | |
| Dry rubbing | 4 | 4 | 3-4 | ISO 105 X12/GB/T 3920 | |||
| Wet rubbing | 4 | 3-4 | 3 | ISO 105 X12/GB/T 3920 | |||
| Light (except white color) | 4 | 3-4 | 3-4 | ISO 105 B02/GB/T 8427 | |||
For above points marked by *,to refer to OEKO-TEX STANDARD 100 requirements
Above data are average values coming from tests carried out in our laboratories
